A flat roof that ponds water is a flat roof with a problem. Standing water degrades membrane material, compresses insulation, and finds every weak point in the system. Sandgap Roofing & Maintenance solves ponding with tapered insulation that creates positive drainage, minimum quarter-inch per foot slope to drains, scuppers, or roof edges.
TPO is our most-installed flat roof membrane. White reflective surface reduces cooling costs, hot-air welded seams create a watertight bond stronger than the membrane itself, and manufacturer warranties run 15-20 years. We install 60-mil and 80-mil TPO, fully adhered or mechanically attached over polyiso insulation.
Our Flat Roofing Process
Free Evaluation
Our inspector checks every detail: ponding areas, seam separations, flashing failures, clogged drains, UV degradation, and blistering. Core samples test insulation moisture content. You get photos and an honest assessment.
System Recommendation
Based on inspection findings, we recommend the right solution: targeted repair, a coating system, or full replacement. Each option is priced with material specs, warranty terms, and expected lifespan.
Professional Installation
Insulation board cut and installed with staggered joints. Membrane installed over insulation per manufacturer specs. All penetrations (pipes, vents, HVAC curbs) receive custom-fabricated flashing. Drains and scuppers cleared and properly connected to the new membrane system.
Warranty & Drainage Test
After installation, we verify drainage by checking water flow to all drain points. No ponding. Every seam tested. Manufacturer warranty registered, 15-20 year coverage depending on system and build-up.
What Sandgap Customers Say
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
"After getting several quotes, these guys stood out with their honesty and knowledge. No pressure, just straightforward advice and excellent workmanship."
Why Choose Sandgap Roofing & Maintenance for Flat Roofing?
Electronic Leak Detection
We use electronic testing to pinpoint flat roof leaks without destructive investigation. Find the source, fix the source, move on.
Core Sampling & Testing
Before recommending replacement or coating, we core sample the roof to check insulation moisture. Waterlogged insulation means tear-off. Dry insulation means options.
All Flat Roof Systems
TPO, EPDM, PVC, modified bitumen, built-up roofing, and coatings. We install the right system for your building, not whatever we have on the truck.
13+ Years Flat Roof Experience
Sandgap Roofing & Maintenance has been installing and repairing flat roofs in Sandgap for 13 years. Residential flat sections, commercial buildings, and everything in between.